Sản phảm
Switch H3C LS-5560S-28P-SI-GL
KHUYẾN MÃI
Miễn phí hướng dẫn sử dụng và cài đặt từ xa cho khách hàng ở xa.
Miễn phí giao hàng, cài đặt và hướng dẫn sử dụng khu vực HCM.
Chính sách bán hàng
Layer 3 Gigabit Access Switch |
- 24 cổng 10/100/1000 BASE-T - 4 cổng SFP+ 1/10GE - 1 cổng Console |
- RAM/FLASH: 512MB/256MB |
- Tốc độ chuyển mạch: 56Gbps/598Gbps |
- Tốc độ chuyển mạch gói: 42Mpps |
- Khả năng ghép chồng (công nghệ IRF2): tối đa 9 thiết bị, băng thông 16Gbps |
- QoS: Diff-Serv QoS, SP/WRR/SP+WRR, Traffic speed control, 802.1p/DSCP priority mapping |
- Link Aggregation: 1G/10G port aggregation, Static aggregation, Dynamic aggregation, Multichassis link aggregation |
- MAC: 8K |
- VLANs: 4K |
- Tính năng Layer 3: DHCP server, DHCP Client, DHCP Snooping, DHCP Relay, DHCP Option 82, IPV4/IPV6 static routing RIP/ RIPng, OSPFV1/V2/V3, VLAN, STP/RSTP/MSTP protocols, STP Root Protection, Smart Link, RRPP |
- Tính năng Ethernet: Traffic control (802.3x), Green Ethernet (EEE), Automatic port energy-saving, Dynamic link aggregation (802.3ad) and static port aggregation, 802.1p and 802.1Q, Cable diagnosis, STP(802.1D)/RSTP(802.1w)/MSTP(802.1s), TC snooping, BPDU protection/root protection/loopback protection/protection against TC-BPDU attack |
- Thiết kế: Fan, vỏ sắt, hỗ trợ lắp đặt tủ rack |
- Quản lý và bảo trì: Cloudnet, Web page configuration, Console, Telnet, Remote Monitoring (RMON), SNMP, System log, IMC network management system, IRF2, NTP, LLDP, LLDP-MED, Sflow, Debugging information output, Telnet-based remote maintenance, NQA, DLDP, Loopback detection, Virtual Cable Test, DLDP |
- Nhiệt độ hoạt động: -5°C to 45°C |
- Chống sét 6kV |
- Nguồn cấp: AC: 100 V to 240 V, 50/60 Hz |
- Kích thước: 440×160×43.6 mm |
Thông số kỹ thuật thiết bị chuyển mạch H3C LS-5560S-28P-SI-G
Datasheet H3C LS-5560S-28P-SI-GL | |
Item | S5560S-28P-SI |
Port switching capacity | 56 Gbps |
Packet forwarding rate | 42 Mpps |
CPU | 1 Core, 800MHz |
Dimensions (H × W × D) | 43.6 × 440 × 160 mm |
Weight | < 2.5 kg |
Management Ethernet ports | 1 console port |
SDRAM/Flash | 512MB/256MB |
Maximum stacking num | 9 |
Stacking bandwidth | 16 |
Service ports |
24× 10/100/1000Base-T autosensing Ethernet ports |
Power consumption |
MIN: AC 9W |
Operating temperature | 0ºC to 45ºC (32°F to 113°F) |
Operating humidity | 10% RH to 90% RH, non-condensing |
Link aggregation |
1G/10G port aggregation |
Jumbo frame | 10,000 byte |
MAC address table |
Blackhole MAC address |
Flow control | 802.3x flow control and half-duplex backpressure |
VLAN |
Port-based VLAN |
ARP |
ARP Detection |
ND | Supported |
VLAN virtual port | Supported |
DHCP |
DHCP Client |
DNS |
Static and Dynamic DNS |
Routing protocols |
IPV4/IPV6 static routing |
Strom suppression |
Storm suppression based on port bandwidth percentage |
Layer 2 ring network protocol |
STP/RSTP/MSTP |
Mirroring |
Flow mirroring |
QoS/ACL |
Packet filter |
Layer 2 ring network protocol |
STP/RSTP/MSTP/PVST+/RPVST |
Multicast |
GMP Snooping v1/v2/v3 and MLD Snooping v1/v2 |
Security |
Hierarchical user management and password protection |
Loading and upgrading | Loading and upgrading through FTP/TFTP |
Management and maintenance |
Configuration from CLI |
Ordering | |
Product ID | LS-5560S-28P-SI-GL |
Product Description | H3C S5560S-28P-SI L2 Ethernet Switch with 24*10/100/1000BASE-T Ports and 4*1000BASE-X SFP Ports,(AC) |